Application / Hot rolled ferritic rod


Product information

Here you can find documents related to our products:

Download catalog
About Hot rolled ferritic rod

  • Quality control: Detection of defective areas in test material and assignment of test piece to a quality category 
  • Process control: Identification of defective rolling elements in the line that cause periodic defects
  • Coil holder: Water-cooled and robust stainless steel construction for raw industrial environment, shown in photo
  • Networking: Integration of inspection system into existing computer networks and line control systems
  • Rod/bar characteristics: All metals; Ø 4–115 mm (0.16–4.5 in)
  • Temperature: Max. 1200 °C (2192 °F)
  • Production speed: Max. 200 m/s (656 ft/s)
  • Manufacturers of hot rolled bar and rod struggle not only with randomly distributed flaws in the finished products but also with defective rollers that lead to repetitive defects. Our hotrod inspection system addresses both of these concerns. Firstly, the quality of the rod or bar is evaluated and classified for you using a classification scheme that you can configure.Secondly, you can pinpoint damaged roller elements in the production line that cause periodic defects, provided you have the necessary roller data. The EDDYTREND  software displays the last 4 coils to let you identify quality trends early and stop production deterioration before it escalates.

Reated Projects

Double-wall brazed tubing

  • Detects critical defects: Finds typical processing defects such as flaws in the inner and outer seam, copper spots and runs
  • Inline inspection: Immediate test results and feed

Continuous drawing line

  • Input control: Identification of bad quality rolled wire (drawing lines for thick wire)
  • Process control: Monitoring of production lines to avoid scrap (medium and fine drawing bloc

Rotational testing

  • Products tested: All seamless products that are round or off-round
  • Production types: Straightening lines, continuous drawing lines, offline final inspection
  • Inspectio

Cold heading machines

In the manufacture of small parts using cross-cutting or cold heading machines, high scrap rates often result from defective starting material. Testing the initial material and cutting out the defecti