product / Segment Coil Holder with Magnetization Units


Product information

Here you can find documents related to our products:

Download catalog
About Segment Coil Holder with Magnetization Units

Coil holders

Using four segment coils, this coil holder was specially designed for weld seam and circumferential testing. The frame opens to allow removal of the system from the production line, e.g. for calibration. The holder is mounted on a sliding table along with a longitudinal magnetization unit for weld seam testing.

Reated Projects

BILLETCHEK

Detection of corner defects

  • For detection of transverse cracks or short longitudinal defects
  • Inspects square billlets, 80-130 mm on one side (3-5 inches)
  • Syst

Segment Coils

Eddy current sensors

  • With or without absolute channel
  • Test piece diameters: 10-520 mm (3/8-20 7/16 inches) or flat
  • Special coils available with 50°, 90Â

Magnetization Units

Electromagnetic saturation units

  • Different sizes available to accomodate all encircling coil sizes
  • Test piece diameter: 0.1-227 mm (1/8-8 7/8 inches)
Testing Tables

Tables for NDT applications


All the units required for eddy current testing in the line can be placed on a convenient testing table that is height-adjustable. It can be raised or low