For detection of transverse cracks or short longitudinal defects
Inspects square billlets, 80-130 mm on one side (3-5 inches)
System allows for billet deformation such as warp and twist
Includes marking unit for marking of defects on all four corners
BILLETCHEK was designed especially for detecting cracks in the corners of billets with a square profile. The billet is guided on rollers between four special corner probes. To allow for billet deformations such as warping and twisting, the probes are pneumatically suspended in a spring loaded frame that moves with the billet. After inspection, the billet passes through a 4-point marker that marks defects identified by the EDDYCHEK eddy current inspection system. Test results were fully documented.
Using four segment coils, this coil holder was specially designed for weld seam and circumferential testing. The frame opens to allow removal of the system from the production lin