product / EDDYCHEK LAB2


Product information

Here you can find documents related to our products:

Download catalog
About EDDYCHEK LAB2

PRUFTECHNIK's first analog eddy current equipment

  • Fully customizable to individual applications
  • Modular and extensible
  • Easy to exchange in line
  • Userfriendly
EDDYCHEK LAB 2 was PRÜFTECHNIK's first analog eddy current testing equipment that was used for testing semi-finished ferromagnetic, austenitic and non-ferrous metals in the production line. This one-channel tester featured a screen with a cathode-ray tube and could be operated via switches and buttons.Technical data:
  • Frequency modules: from 2.5 kHz to 500 kHz
  • Gain: adjustable from 40 to 89 dB in steps of 1 dB
  • Outputs: 
    4x 110 V or 22 V/500 VA, solid state outputs via isolated opto-relay;
    4x potential-free opto-coupler outputs (20 mA load);
    1x recorder output, load impedance > 10 kOhm;
    1x end signal suppressing output for connection to proximity switch or light barrier
  • Inputs: 
    1x input for external shift pulses from distance encoder;
    1x input for material sensing transducer or light barrier for end signal suppression;
    1x input for contact from cutter or shear
This product was discontinued in the year 2000. Its successor is  EDDYCHEK 5 advanced.

Reated Projects

Chart recorder

Analog signal recording

Chart Recorders 
  • LAB 2607
  • EDY 1607
  • LAB 1607
EDDYCHEK 5: Chart Recorder is substituted with&n

Conveyors

Transport systems for NDT applications


For offline testing, PRÜFTECHNIK plans and supplies complete conveyor systems used in transporting the product to be tested.The conveyo

Rotating System RS130

Testing for longitudinal defects of large diameters

  • For identification of longitudinal defects
  • Available in three sizes:
  • RS 35: 3-35 mm (1/8-1¼&nb

Rotating Unit RFL65

Sensitive bar testing sensor for smaller diameters

  • High speed testing
  • Cost-effective
  • Diameter range: 5 -65 mm (black and bright bars)
  • User-friendly
  • &nbs